Flooding in Uzbekistan and Kazakhstan

-

Flooding in Uzbekistan and Kazakhstan

Flood waters continued to inundate villages and farmland one week after water breached the wall of a reservoir in Uzbekistan.

The western wall of a dam around the Sardoba Reservoir broke on May 1, 2020, following a week of heavy rain in the region. Images acquired on May 8, 2020, with the Operational Land Imager (OLI) on Landsat 8 show where that water ultimately collected in Uzbekistan and Kazakhstan. For comparison, the left image above shows the same area on April 22, before the dam failure.

Construction of the reservoir, located in Uzbekistan's Sirdaryo region, was completed in 2017. It was designed to hold more than 920 million cubic meters of water for irrigation of the region's agriculture.

The first detailed view above shows the spot of the dam failure, as well as the partially empty reservoir, on May 8. Water was no longer pouring across the breached wall at the time of the satellite image, but you can see where the once fast-moving flood water had scoured the land. Some of the water followed channels northward alongside the dam and then flowed east.

Not all of the water, however, flowed neatly within channels. David Petley, of the University of Sheffield, wrote in a blog post that the water covered a broad area as it flowed away from the reservoir, damaging fields and villages along the way. (The contrast between vegetated and flooded areas is especially apparent in false-color images.)

Water flowing north of the reservoir ultimately pooled across a large area spanning the border of Uzbekistan and Kazakhstan. The second detailed view above shows the southern patch of the pooled water in Uzbekistan.

According to news reports, tens of thousands of people were evacuated from villages in both countries. The flooding submerged homes and destroyed farms and infrastructure across important agricultural areas.

NASA Earth Observatory images by Lauren Dauphin, using Landsat data from the U.S. Geological Survey. Story by Kathryn Hansen.



#Landsat #NASA #USGS #Earth


....


Vineesh V
Assistant Professor of Geography,
Directorate of Education,
Government of Kerala.
https://g.page/vineeshvc

Comments

Post a Comment

Popular posts from this blog

Spatial feature manipulation in remote sensing

-
Image
Spatial feature manipulation in remote sensing refers to the process of altering or modifying the spatial characteristics of a particular feature in an image or data set. This can be done for a variety of reasons, such as to improve the accuracy or clarity of the image, to enhance the interpretability of the data, or to extract specific information from the image. One common method of spatial feature manipulation is resampling, which involves changing the resolution or spatial extent of an image. This can be done to match the resolution of other data sets, to reduce the size of the image for faster processing, or to increase the resolution for greater detail. Another technique is spatial filtering, which involves applying mathematical operations to the image data to remove noise or highlight specific features. This can be done using convolution filters, which apply a pre-defined mathematical function to the image data, or using image enhancement techniques, such as contrast stretching
Read more

Grey level thresholding. Level slicing. Contrast stretching lo p

-
Image
Grey level thresholding. Level slicing. Contrast stretching. Image enhancement Lillesand and Kiefer (1994) explained the goal of image enhancement procedures is to improve the visual interpretability of any image by increasing the apparent distinction between the features in the scene. This objective is to create "new" image from the original image in order to increase the amount of information that can be visually interpreted from the data. Enhancement operations are normally applied to image data after the appropriate restoration procedures have been performed. Noise removal, in particular, is an important precursor to most enhancements. In this study, typical image enhancement techniques are as follows: Grey level thresholding Grey level thresholding is a simple lookup table, which partitions the gray levels in an image into one or two categories - those below a user-selected threshold and those above. Thresholding is one of many methods for creating a binary mask for an i
Read more

Spatial filtering, Remote Sensing. Low-pass filter. High-pass filter

-
Spatial filtering encompasses another set of digital processing functions which are used to enhance the appearance of an image. Spatial filters are designed to highlight or suppress specific features in an image based on their spatial frequency. Spatial frequency is related to the concept of image texture. It refers to the frequency of the variations in tone that appear in an image. "Rough" textured areas of an image, where the changes in tone are abrupt over a small area, have high spatial frequencies, while "smooth" areas with little variation in tone over several pixels, have low spatial frequencies. A common filtering procedure involves moving a 'window' of a few pixels in dimension (e.g. 3x3, 5x5, etc.) over each pixel in the image, applying a mathematical calculation using the pixel values under that window, and replacing the central pixel with the new value. The window is moved along in both the row and column dimensions one pixel at a time and the ca
Read more